Fast Delivery GE Fanuc CM400RGICH1ACB Module

GE Fanuc Module CM400RGICH1ACB One Year Warranty In Stock

Description

Do not remove the RDSD from the CPU during the transfer.▪ If the target name in the RDSD is different from the target name in the RX3i, the RDSD LED willblink red. If this is expected or acceptable, momentarily depress the START pushbutton again.▪ The RDSD LED blinks green during the transfer. This can take from 10 – 150 seconds, dependingupon the size of the project data.▪ The RDSD LED should turn solid green, indicating that the transfer completed successfully.Unless the RUN/STOP Switch has been disabled in the hardware configuration just stored, it canbe used to place the RX3i into RUN Mode after the transfer.▪ If the RDSD LED turns solid red, the transfer has failed:- The target memory area(s) in the CPU are cleared. For example, if only the Logic is beingdownload from the RDSD and the store fails (e.g. stick pulled, problem with transfer ordata), Logic memory is cleared following the failed RDSD download. If other memoryareas were also queued up for transfer, those memory areas are also cleared as a result ofthe failure.- There will be a copy of the fault tables as they existed at the end of the attempted transferon the RDSD. Insert the RDSD into a PC which has the PACS Analyzer software and selectthe plcfaultafter.dat file on the RDSD for fault table analysis by the Analyzer.- If the RDSD LED turns solid red, indicating an error, another RDSD operation cannot beinitiated until the device is disconnected then reconnected. 

GE Main series

1. IC200 series Versamax: IC200ALG322 | IC200CHS002 | IC200PWR102 | IC200CPU001 

2. IC693 series: IC693MDL730  Module | IC693CPU311(323,331..363,374) | IC693ALG392 | IC693CBL300  Cable

3. IC694 series: IC694APU300 | IC694BEM331 | IC694MDL740

4. IC695 series: IC695CPU310 | IC695CHS007 | IC695ACC402 | IC695LRE001 | IC695CPE310

5. IC697 series: IC697BEM733 | IC697CHS750  Rack, Chassis | IC697CMM711 | IC697CPU731 (772,780)  

6. IC698 serise: IC698CPE010 | IC698CPE020 | IC698CRE030 | IC698PSA100 | IC698RMX016 |  IC698ETM001 | IC698CPE030

7. Relay module: SR469-P5-HI-A20 |369-HI-R-M-0-0-0-E

8. Gas turbine card: IS200VCRCH1BBB | IS200EMCSG1AA | IS215VAMBH1A | DS200CTBAG1ADD | DS3800HCMC1A1B

Advantage Products

①Allen-Bradley(USA AB)Series

②Schneider(Schneider Electric)Series

③General electric(General Electric)Series

④Westinghouse Series

⑤SIEMENS Series

⑥ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots.

⑦Westinghouse: OVATION System、WDPF System、MAX1000 system spare parts.

Conversion、I/O Signal processing、Data communication systems?Digital-to-Analogue

⑧Invensys Foxboro I/A Series system，FBM（I/O）SCS、Trapezoidal logic control、Accident recalling、DAC

Invensys Triconex: Redundant fault-tolerant control system、Most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture.

⑨Siemens：Siemens MOORE，?Siemens Simatic C1，Siemens CNC system.

About us

We can help you find more automation accessories, whether brand-new accessories or expired/discontinued accessories,  Jak PLC is committed to running the business at the best cost and in the most efficient way.

Whether it is customer service, productivity or delivery speed, we always strive for excellence and do better

Other Products

Problems?

We like to work with our customers to ensure that you have the best possible experience when buying from our stores. If you have any questions or problems, we will be more than happy to cooperate with you. If you have any questions, please contact us before leaving neutral or negative feedback so we have a chance to work it out together. We sincerely cherish our customers, your 100% satisfaction is very important to us!