GE Fanuc IC200MDL241 Module In Stock

General Electric IC200MDL241 Module New In Stock

Description

Ordinarily, a VersaMax PLC system is configured by creating a configuration fileon the programmer (computer), then transferring the file from the programmer tothe PLC CPU via the CPU port. The CPU stores the configuration file in its nonvolatile RAM memory. The configuration is stored whether I/O scanning is enabledor not. After the configuration is stored, I/O scanning is enabled or disabledaccording to the newly-stored configuration parameters.Autoconfiguration and Storing a ConfigurationClearing a configuration from the programmer causes a new autoconfiguration to begenerated. Autoconfiguration remains enabled until the configuration is stored fromthe programmer again. Storing a configuration disables autoconfiguration.Storing a Configuration with Non-default Memory AllocationIf you reconfigure reference tables from the default sizes, storing a hardwareconfiguration to the PLC in the future will clear memory contents. If you want toretain memory contents, first load reference memory contents from the PLC to theprogrammer. Then, re-store reference memory when you store the hardwareconfiguration from the programmer to the PLC.Default Serial Port ParametersWhen a programmer is first connected, the PLC communicates using the defaultcommunications parameters: 19,200 baud, odd parity, one start bit, one stop bit, andeight data bits. If these parameters are re-configured, the new settings will be usedat powerup instead.Serial Port Configuration Takes Effect After Removing ProgrammerIf a hardware configuration is stored to the CPU, the configuration for the serial portto which the programmer is connected is not actually installed until the programmeris removed. After removal of the programmer, there is a delay before the newprotocol begins operating. This delay is equal to the configured T3’ time.

GE Main series

1. IC200 series Versamax: IC200ALG322 | IC200CHS002 | IC200PWR102 | IC200CPU001 

2. IC693 series: IC693MDL730  Module | IC693CPU311(323,331..363,374) | IC693ALG392 | IC693CBL300  Cable

3. IC694 series: IC694APU300 | IC694BEM331 | IC694MDL740

4. IC695 series: IC695CPU310 | IC695CHS007 | IC695ACC402 | IC695LRE001 | IC695CPE310

5. IC697 series: IC697BEM733 | IC697CHS750  Rack, Chassis | IC697CMM711 | IC697CPU731 (772,780)  

6. IC698 serise: IC698CPE010 | IC698CPE020 | IC698CRE030 | IC698PSA100 | IC698RMX016 |  IC698ETM001 | IC698CPE030

7. Relay module: SR469-P5-HI-A20 |369-HI-R-M-0-0-0-E

8. Gas turbine card: IS200VCRCH1BBB | IS200EMCSG1AA | IS215VAMBH1A | DS200CTBAG1ADD | DS3800HCMC1A1B

Feel free to contact us

l New Low Price!

l If you have any question or need any help,please contact me DIRECTLY.i will do what i can to help you.

l We believe our products are excellent. We trust you will be satisfied with your purchase.

l When you are satisfied with our products and services, please give us positive feedback.

l If there is a problem, please contact us immediately through any email request.

Other Parts In Stock

1. ABB  (DSQC, AC800M,OCS 07KT97/07AI/07DI,PM645,etc)

2. BENTLY (3500,3300 system sereis)

3. HONEYWELL (DC 2000, TDC3000, TPS, security systems)

4. SCHNEIDER (Quantum 140 series: CPU processor, communication module)

5. FOXBORO (FBM203/204/217,FCP240/270)

6. EMERSON (DeltaV systems, / O unit, Analog AI module, Analog AO module)

7. YOKOGAWA (CS3000 system CPU controller module, analog module)

8. EPRO (MMS6210/621,PR6423/003-031..)

9. Rosemount  ( pressure transmitter, flow meter..)

Other Products