New GE Fanuc IC200MDL750H Module

GE Fanuc IC200MDL750H Module 12 Months Warranty

Description

High/low (hardware) limit checking is provided for each analog input. These limitsare not configurable, and are selected to be outside the normal operating range butinside the linear hardware operational range (before the hardware reaches saturation).Diagnostic messages for hardware limit checks and all other hardware diagnosticsfor the board can be accessed with the software maintenance tools. A compositediagnostic alarm state is provided in the database for each I/O pack, and a separatelogic state is provided to indicate a high/low (hardware) limit fault of any analoginput or the associated communications for that signal.Diagnostic and system (process) alarms are time-stamped in the controller(s) andtransmitted to operator and maintenance stations. Communication links to a plantdistributed control system (DCS) can contain both the software (system) diagnosticsand composite hardware diagnostics.Diagnostic LEDs are provided on I/O packs as previously shown for the Analog I/Opack. Standard LEDs indicate: power status, attention (abnormality detected),Ethernet link connected, and Ethernet link communicating. LEDs on discrete I/Opacks also indicate the status of each point. All boards feature an electronic ID thatcontains the board name, revision, and a unique serial number. When power isapplied to the I/O processor, it reads the ID of the terminal board, application board,and itself. It then uses this information for a start permissive, diagnostics, and systemasset management. Since the terminal boards can be mounted remote at theequipment, local temperature sensors monitor the temperature at each I/O pack.Excessive temperature causes an alarm message. The alarm state and currenttemperature value are available for display and for use in the application software.

More About GE Fanuc

IC693CPU363Series 90-30 Module CPU Backplane
IC200PBI001VersaMax I/O Module Profibus Interface Unit
IC693APU300Series 90-30 High Speed Counter Module
IC693MDL730Series 90-30 Output Module 2 Amp Positive Logic 8 Points
IC697CMM711Series 90-70 Communication Coprocessor
IC697BEM731Controller Module Series 90-70 Genius I/O Bus Controller
IC200ALG430VersaMax Analog Mixed Module
IC697PWR711Series90-70 Power Supply Module
IC670MDL640Field Control Input Module
IC693CPU323Series 90-30 CPU Module
IC695CPU310RX3i CPU Module Series

Competitve Price For Below

1) Allen-Bradley (1756, 1785, 1771, 1746, 1747, 1769, 1794..)

2) TRICONEX(3636T, 3604E, 3503E, 3805E, 4353, 4329A, 4329...)

3) ICS (T841, T8461, T3401, T8310...)

4) BENTLY NEVADA(3500/42M, 3500/22M, 3500/95, 3500/05, 3500/20...)

5) HIMA(F8650E, F8641, F8650X, F7130A, F8621A....)

6) FOXBORO(FBM203,FBM204,FBM217,FMB231...)

7) Honeywell(CC, 8C, TC, TK...)

8) ABB (DSQC, Bailey, OCS 800XA.....)

9) GE(IC693, IC697, IC695, IS200, DS200)

10) BACHMANN(CM202, DI232, MPC240, NT255, AIO288...)

11) Schneider(QUANTUM, MODICON...)

Our Main Products